The 9 best residential roofing contractors serving Denver, CO — independently researched and ranked. No paid placements.
Residential roofing in Denver spans asphalt shingles, metal, tile, and flat systems for houses, townhomes, and small multi-family buildings. The 9 contractors below were selected from our full Denver top 10 as the strongest for residential work, ranked by experience, manufacturer certifications, BBB standing, and verified reputation.
Denver's residential roofing decisions are driven primarily by hail — the metro sits in a region that consistently ranks among the nation's top three for hail claim frequency. Class 4 impact-resistant shingles have become effectively the standard for new residential work across the Front Range, and Colorado insurers commonly offer 20–28% premium discounts to homeowners who install them. The upgrade adds roughly $1,000–$2,500 to a typical installation over standard architectural shingles but can pay back within a few policy cycles.
A secondary factor unique to Denver is the chinook wind pattern: warm, dry downslope winds from the Rockies can hit 60–80 mph in the foothills and 40–50 mph on the plains east of the metro, lifting improperly nailed or aged shingle tabs. Wind-nail patterns (6 nails per shingle rather than the standard 4) are now specified by many local contractors and are required by some municipal building departments for replacement work above a certain slope.
According to Red Diamond Roofing's 2026 Colorado guide, a standard architectural shingle replacement on a 2,500 sq ft Denver home runs $10,000–$18,000 installed; Class 4 impact-resistant systems add approximately $1,000–$2,500 in material cost over that baseline.
Roofcorp of Metro Denver has installed roofs across the Denver metro since 1996 and reports more than 20,000 completed roofs. It holds triple manufacturer certification as a GAF Master Elite contractor, a CertainTeed Select ShingleMaster, and an Owens Corning Platinum Preferred Contractor, which together back extended material and workmanship warranties. The company is BBB accredited with an A+ rating (accredited since 2006) and stocks certified Class 4 impact-resistant shingles to address Colorado's frequent hailstorms.
SpecialtyCommercial & Residential Roofing & Sheet Metal
Service AreaDenver Metro & Front Range
Operating since 1947 and headquartered in Frederick, B&M Roofing of Colorado is one of the oldest continuously operating roofers serving the Denver metro and the Front Range from Fort Collins to Colorado Springs and beyond. It is BBB accredited with an A+ rating (accredited since 2010) and displays National Roofing Contractors Association recognition. B&M handles commercial flat systems including TPO and EPDM, residential metal and tile, plus architectural sheet metal and gutters.
Commercial RoofingResidential RoofingFlat Roof Systems (TPO/EPDM)Metal RoofingArchitectural Sheet MetalGuttersRoof RepairSkylights
Founded in 1984 by Doug and Roger Wilson, Wilson Brothers Roofing is a locally owned and operated Denver contractor that offers its own sheet metal fabrication. It is BBB accredited with an A+ rating (accredited since 1990) and states it is a member in good standing of the National Roofing Contractors Association and the Colorado Roofing Association. Wilson Brothers installs roofing on homes and EPDM, TPO, and other low-slope systems on commercial buildings, backed by an OSHA-compliant safety program.
Roof ReplacementRoof RepairCustom Metal RoofingSheet Metal FabricationTile & Slate RoofingCommercial Flat RoofingHail DamageGutters
Interstate Roofing was founded in Denver in 1994 by owner Scott Riopelle and reports more than 24,000 completed residential and commercial projects from its Denver headquarters, with locations spanning multiple states. It holds GAF Master Elite, Owens Corning Platinum Preferred, and CertainTeed Master Select certifications and states it has ranked among the top 10 contractors nationally by Roofing Contractor Magazine. The company is BBB accredited with an A+ rating (accredited since 2000) and specializes in storm and hail damage work and insurance-claim support common across the Colorado Front Range.
Jenesis Roofing is a family-owned, locally operated Denver company that BBB records show has been in business since 1999. It is BBB accredited with an A+ rating (accredited since 2013) and carries GAF/Elk, CertainTeed Quality Master, and Owens Corning certifications. Jenesis handles residential and commercial new construction, reroofing, leak repair, skylights, custom metal, gutters, snow guards, and solar across communities including Arvada, Aurora, Boulder, Lakewood, Littleton, and Westminster.
Roof ReplacementRoof RepairNew ConstructionCustom Metal RoofingSkylightsSnow GuardsGuttersSolar Installation
Founded in 2006, Elite Roofing & Solar is based in Denver and serves the wider state, including Colorado Springs, Fort Collins, Littleton, and Summit County. It lists GAF Master Elite, Versico, and NABCEP credentials and pairs roof replacement, storm restoration, and commercial EPDM/TPO work with full solar panel installation. The company is BBB accredited with an A+ rating (accredited since 2010), making it a strong choice for homeowners combining a new roof with solar.
Metro City Roofing is a Denver residential roofer whose team averages more than 20 years of experience and which positions itself around insurance-claim work, stating every sales team member holds an All Lines Adjuster License. It is an Owens Corning Top of the House and Malarkey Emerald Pro contractor, an ICC member, and a Colorado Roofing Association member. The company is BBB accredited with an A+ rating (accredited since 2019) and focuses on roof replacement, repairs, inspections, and hail and storm damage across the Denver metro and Front Range.
Cenco Roofing has handled roofing and insurance-claim restoration across Denver and the Front Range since 2013, from Fort Collins to Colorado Springs. It states it uses NRCA-certified crews and FORTIFIED-trained installers, and backs work with a five-year workmanship warranty and 24/7 emergency response. Beyond roof repair, replacement, and storm-damage work, Cenco offers gutter replacement and attic insulation, is BBB accredited with an A+ rating (accredited since 2014), and partners with Rebuilding Together Colorado.
Thee Denver Metal Roofing Company is a Colorado specialist focused on 24-gauge mechanical standing seam metal roofing systems, using single- and double-locked seaming and on-site roll-forming of sixteen-inch panels. Alongside full metal roof installation it offers chimney repair, parapet wall caps, louver ventilation, S-5 snow retention systems, and metal trim work for residential and light-commercial projects across the Denver area and Colorado mountains. It is a focused choice for homeowners specifically seeking durable, hail-resistant metal roofing.
Standing Seam Metal RoofingMetal Roof InstallationOn-Site Roll-FormingSnow Retention SystemsParapet Wall CapsChimney RepairMetal Trim & Flashing
After any confirmed hail event with stones 1 inch or larger
The FM Global hail threshold for functional damage to standard asphalt shingles is 1-inch diameter. Denver averages multiple such events per year across some part of the metro. Even when shingles look intact, fractured fiberglass mat and displaced granules reduce water-shedding performance and accelerate UV aging. Insurance adjusters use Verisk Xactimate pricing — having your own inspection report before the adjuster's visit protects your position.
When replacing a pre-2010 roof that predates Class 4 shingle availability
Before roughly 2008–2010, Class 4 impact-resistant asphalt shingles were a niche product. Any Denver home with an original roof from before that period almost certainly has standard architectural shingles. Replacing with Class 4 product converts future hail exposure into a manageable insurance line item rather than an emergency. Verify that the specific shingle carries an FM 4473 or UL 2218 Class 4 test certification — not all marketed 'impact-resistant' products achieve the top rating.
For homes in the foothills or exposed ridgelines
Properties in Jefferson and Clear Creek counties, or on exposed ridges in Arvada, Lakewood, and Evergreen, face both elevated wind events and faster shingle aging from UV at altitude. At 5,280 feet, UV radiation is approximately 25% more intense than at sea level. Architectural shingles in these locations may perform below their rated service life; premium shingles with higher SRI values or metal roofing become financially competitive over a 30-year horizon.
Frequently Asked Questions
How many residential roofing contractors are in Denver?
Our directory lists 9 independently verified residential roofing contractors serving Denver, Colorado, ranked by experience, certifications and reputation. Roofcorp of Metro Denver is ranked #1. There are no paid placements.
How do I choose a residential roofer in Denver?
Confirm licensing and insurance for Colorado, ask for residential project references in Denver, get multiple written quotes, and check each contractor's BBB standing. Every company listed here has been independently researched.
Will my Colorado homeowner's insurance pay for Class 4 shingles if my existing roof was standard?
In most cases, Colorado insurers pay actual cash value or replacement cost for like-kind material — meaning they typically cover standard architectural shingles if that's what you had. However, many policies allow you to pay the difference to upgrade to Class 4. Some carriers now specifically require Class 4 as a condition of continued coverage after a claim. Review your policy's materials clause and ask your adjuster before signing a contractor supplement.
How do I verify a contractor's Class 4 shingle installation is done correctly?
Ask for the shingle manufacturer's certification (FM 4473 or UL 2218 Class 4 stamp on the packaging), confirm the nail pattern meets IRC 2021 or Colorado's adopted building code for your slope zone, and request a copy of the permit and final inspection from your municipality. Many Denver-area jurisdictions require a roofing permit for replacements — a contractor who skips the permit is also likely skipping the inspection that catches improper installation.
Does Denver's altitude affect how quickly asphalt shingles age?
Yes, meaningfully. UV intensity at Denver's elevation is roughly 25% higher than at sea level. Asphalt shingles rely on ceramic granules to reflect UV; once granule loss begins — which hail accelerates — the asphalt mat degrades faster. Standard 30-year architectural shingles in Denver often perform closer to a 20–25 year lifespan in full-sun exposures. Impact-resistant products with heavier SBS-modified asphalt layers perform better in this environment.