Updated June 2026

Best Metal Roofing Contractors in Honolulu

The 3 best metal roofing contractors serving Honolulu, HI — independently researched and ranked. No paid placements.

Metal roofing — standing seam and metal shingles — is valued in Honolulu for its longevity, wind resistance, and ability to shed snow and rain. The 3 contractors below were selected from our full Honolulu top 10 as the strongest for metal roofing work, ranked by experience, manufacturer certifications, BBB standing, and verified reputation.

Honolulu's roofing environment is shaped by three forces that are rare in combination on the mainland: sustained trade winds, intense tropical UV radiation, and marine salt air that reaches even properties well back from the shoreline. Metal roofing has deep roots in Hawaii's building culture — the iconic standing-seam roofs visible across older residential Honolulu reflect a practical tradition built on the material's resistance to all three of these forces. Modern metal panel systems have extended that tradition with factory-applied fluoropolymer coatings, concealed-fastener details, and engineered wind-uplift ratings that align with Hawaii's demanding building code requirements.

On Oahu, roof pitch and occupancy type shape which metal system is most appropriate. Low-pitch residential and commercial roofs on the leeward side often use exposed-fastener panels selected for straightforward installation and budget flexibility. Higher-pitch homes in the Ko'olau-facing windward communities, where rainfall is far heavier and wind is more persistent, benefit from the tighter seam integrity of standing-seam systems. Corrosion resistance is non-negotiable across the island: aluminium substrates or Galvalume steel with premium topcoats are the accepted standard for any property within Oahu's coastal influence zone.

Quick Comparison

Rank Company Specialty Experience BBB Website
1 MRC Roofing, LLC Best for Flat & Spray Foam Roofs 30+ Yrs A+ Accredited Visit
2 Leakmaster, Inc. Best for Cool Roof Coatings Local A+ Accredited Visit
3 King's Roofing Best for Metal Roofing Established A+ Accredited Visit

Detailed Reviews

#2

Leakmaster, Inc.

Best for Cool Roof Coatings
ExperienceEstablished local roofer
BBB StatusA+ Accredited
SpecialtyCommercial & Residential Coatings
Service AreaHonolulu & Oahu

Honolulu-based Leakmaster (license C-16434) is best known for UV-reflective silicone cool roof coatings that waterproof and protect existing roofs without a full tear-off, with material warranties advertised up to 50 years. The firm also handles flat roofs, commercial work, and shingle, metal, and tile systems, and is BBB A+ accredited (since 1997).

Cool Roof Coatings Flat Roof Repair Commercial Roofing Roof Repair Re-Roofing Waterproofing
Visit Leakmaster, Inc.
#3

King's Roofing

Best for Metal Roofing
ExperienceBBB Accredited Since 2009
BBB StatusA+ Accredited
SpecialtyMetal Roofing & Supply
Service AreaOahu-based, all Hawaiian Islands

Based on Oahu and operating as King's Roofing & Contracting LLC, King's specializes in metal roofing and features the TITAN Cool Roof reflective paint system, advertised in 25 colors with a 35-year no-fade warranty. The family-owned business is BBB A+ accredited (since 2009) and supplies metal roofing across the Hawaiian Islands.

Metal Roofing Cool Roof Coatings Custom Metal Work Roofing Supply Roof Replacement
Visit King's Roofing

Trade Winds and Salt Air: Metal Roofing Choices on Oahu

For windward or oceanfront properties facing persistent salt-air exposure

Oahu's windward communities receive both heavier rainfall and higher wind-driven salt loading than the sheltered leeward side. Metal systems specified with aluminium or Kynar-coated Galvalume substrates hold up to marine corrosion far better than standard galvanized products. Confirm that the contractor specifies the substrate and coating finish in writing, not just a generic metal category.

When Hawaii's building code requires engineered wind-uplift compliance

Honolulu's building department enforces Hawaii's wind-design standards, which require roofing systems to meet specified uplift resistance values. Metal panel manufacturers publish tested uplift data for specific fastening patterns and clip spacings; a qualified installer will match the panel system to the engineering requirement for your zone rather than applying a generic installation.

When replacing asphalt shingles that have failed under UV and trade-wind stress

Asphalt shingles typically reach the end of their effective service life earlier in Honolulu than in temperate mainland climates, because intense UV degrades the bitumen binder and sustained wind pulls at tab adhesion. A metal replacement roof sidesteps both failure mechanisms and can align with Hawaii's cool-roof incentive programs that encourage reflective roofing materials.

Frequently Asked Questions

How many metal roofing contractors are in Honolulu?

Our directory lists 3 independently verified metal roofing contractors serving Honolulu, Hawaii, ranked by experience, certifications and reputation. MRC Roofing, LLC is ranked #1. There are no paid placements.

How do I choose a metal roofing roofer in Honolulu?

Confirm licensing and insurance for Hawaii, ask for metal roofing project references in Honolulu, get multiple written quotes, and check each contractor's BBB standing. Every company listed here has been independently researched.

Does metal roofing hold up to Honolulu's trade winds and occasional hurricane-strength storms?

Properly designed and installed metal roofing systems — particularly standing seam with concealed clips — are among the strongest performers in high-wind testing. Hawaii's building code requires demonstrated uplift resistance, and metal panel systems with tested ratings to meet those values have a long track record on Oahu through both sustained trade winds and tropical storm events. Panel-to-structure attachment detail is the critical variable.

Will a metal roof on a Honolulu home corrode quickly near the ocean?

Bare or lightly coated steel corrodes quickly in Oahu's marine environment — this is a real concern for properties within the coastal zone. However, aluminium panels and Galvalume steel with quality fluoropolymer finishes are specifically engineered for salt-air environments and perform well even in ocean-proximity locations. Request the specific substrate and coating specification in your contract, not a general product category.

Can metal roofing in Honolulu qualify for cool-roof or energy programs?

Hawaii's Energy Policy Forum and utility-linked programs have encouraged reflective roofing to manage cooling loads in the islands' warm climate. Light-colored or solar-reflective metal panels can qualify under Hawaii's cool-roof standards, and some utility programs have offered incentives for qualifying materials. Verify current program availability with the installing contractor and the Hawaii Energy program before assuming eligibility.

Metal Roofing Guides

Other Roofing Specialties in Honolulu