Best Metal Roofing Contractors in Memphis

Metal roofing — standing seam and metal shingles — is valued in Memphis for its longevity, wind resistance, and ability to shed snow and rain. The 6 contractors below were selected from our full Memphis top 10 as the strongest for metal roofing work, ranked by experience, manufacturer certifications, BBB standing, and verified reputation.

Memphis and the Mid-South occupy a climate zone where high summer humidity, frequent storm events, and mild but ice-capable winters combine to put significant cumulative stress on asphalt shingle systems. Granule loss from UV exposure, moss and algae growth accelerated by persistent humidity, and the periodic hail and high-wind events that track through Shelby County create a pattern where shingle roofs in Memphis often underperform their rated design life. Metal roofing — particularly standing-seam steel and aluminum systems — addresses these failure modes through an inherently moisture-resistant surface, an absence of organic granule binders that algae colonize, and impact resistance ratings that hold up across Memphis's storm corridor.

Tennessee's contractor licensing threshold applies to Memphis metal roofing installations as it does to other roofing work, and Shelby County's building permit requirements extend to metal system installations. The technical considerations specific to Memphis metal work include thermal expansion management in a climate with warm summer highs and occasional hard freezes, correct attic ventilation design that works with a metal roof's different thermal envelope, and aluminum selection for coastal-adjacent environments where the city's proximity to the Mississippi River delta introduces some salt-laden air from Gulf systems that track north.

How many metal roofing contractors are in Memphis?

Our directory lists 6 independently verified metal roofing contractors serving Memphis, Tennessee, ranked by experience, certifications and reputation. Excellent Roofing is ranked #1. There are no paid placements.

How do I choose a metal roofing roofer in Memphis?

Confirm licensing and insurance for Tennessee, ask for metal roofing project references in Memphis, get multiple written quotes, and check each contractor's BBB standing. Every company listed here has been independently researched.

Does Tennessee's contractor licensing requirement apply to metal roofing in Memphis?

Yes. Tennessee requires a contractor license for roofing work above the state's dollar threshold, and metal installations — which typically exceed that threshold — must be performed by a licensed contractor. Confirm the contractor's Tennessee Board for Licensing Contractors license number and classification before signing any agreement for metal roof installation in Shelby County.

How does Memphis humidity affect metal roof performance over time?

Properly finished metal panels — steel with Kynar-based coatings or Galvalume substrate, and aluminum with protective finish systems — are well-suited to Memphis's humidity. The key risk in humid climates is condensation on the underside of panels in unventilated or poorly vented roof assemblies. A qualified installer will confirm that the ventilation design beneath a Memphis metal roof is adequate to prevent interior condensation buildup, which can cause wood substrate damage even when the panel above is performing correctly.

Are permits required for metal roof installation in Memphis and Shelby County?

Shelby County and Memphis code enforcement require permits for roofing replacements that involve structural changes or deck work. Metal installations that go over an existing deck may require a permit depending on the scope. A Tennessee-licensed contractor will determine the requirement for your specific address and system, and will pull the permit in their own name — a sign of proper licensing and standing in the Memphis market.