The 9 best commercial roofing contractors serving Mesa, AZ — independently researched and ranked. No paid placements.
Commercial and industrial roofing in Mesa covers offices, retail centres, warehouses, and multi-unit buildings — most using low-slope membrane systems such as TPO, EPDM, and modified bitumen. The 9 contractors below were selected from our full Mesa top 10 as the strongest for commercial work, ranked by experience, manufacturer certifications, BBB standing, and verified reputation.
Commercial roofing in Mesa is dominated by a specific challenge that has no good analog in most of the country: intense, year-round ultraviolet radiation combined with sustained triple-digit heat that bakes and prematurely ages any surface without reflective properties. For warehouses, retail centers, office parks, and industrial buildings across the East Valley, this means the standard EPDM or TPO specifications used in northern climates need recalibration. White TPO with reflective coatings and spray polyurethane foam finished with elastomeric coatings have become the systems of choice here because they both seal seamlessly and actively push heat away from the building envelope.
The monsoon season introduces a second commercial roofing challenge that requires thoughtful drainage design. From July through September, Mesa can receive its entire annual moisture allotment in sudden intense bursts, and a flat or low-slope commercial roof that drains slowly under ordinary rain can be overwhelmed by a microburst. Proper internal drain sizing, scupper placement, and positive slope toward collection points are design decisions that a Mesa-experienced commercial roofer understands in a way that a contractor who works primarily in wetter, cooler climates does not. ROC licensing in the C-42 commercial classification signals the minimum entry point for this work, but local track record and manufacturer certification matter equally.
Service AreaPhoenix Valley incl. Mesa & East Valley
Founded by Ron Brown in 1982 and still family-owned, JBS is one of the longest-running roofers serving the Phoenix Valley, including Mesa. The company handles residential foam, tile, shingle and flat roofs plus full commercial systems (built-up, single-ply, metal, silicone and coatings). It holds multiple Arizona ROC licenses across commercial, residential, insulation and general contracting, and is BBB Accredited with an A+ rating since 2011.
Serving the Mesa community since 1984, SUNVEK carries one of the deepest certification stacks in the area: GAF Certified, GAF Commercial Certified, GAF Coatings Pro, CertainTeed Select ShingleMaster, plus Versico, Carlisle and Mule Hide certifications. It installs asphalt shingle, clay and concrete tile, standing-seam metal, spray polyurethane foam, TPO and modified-bitumen systems. SUNVEK is ROC-licensed (#354814 CR42) and BBB Accredited with an A+ rating since 2002.
Based in Mesa, Arizona Foam & Spray has specialized in spray polyurethane foam (SPF) roofing since 1969, making it one of the most experienced foam-roof installers in the state. The company focuses on foam roof installation, reflective coatings, annual maintenance and inspections, leak repair and roof-penetration sealing for both commercial and residential properties. Foam roofing is a popular flat-roof solution in the desert for its seamless, energy-reflective surface.
Operating since 2004 and based in Mesa, Johnson Roofing handles tile, shingle, flat and commercial roofing plus leak repair. It carries an unusually broad product lineup including CertainTeed, Owens Corning, Eagle Roofing, Boral, Malarkey, Tamko, Polyglass and Western States Metal Roofing, giving it strong depth on metal and architectural systems. Johnson Roofing is ROC-licensed (#272325) and BBB Accredited with an A+ rating since 2015.
Metal RoofingTile RoofingShingle RoofingFlat RoofingRoof ReplacementRoof RepairLeak RepairCommercial Roofing
Founded in 1999, America Roofing specializes in both residential and commercial roofing, offering new installation, repair and inspections across pitched and flat systems. It works in asphalt shingle, tile, metal and flat-roof materials and emphasizes commercial work for warehouses, retail and office buildings. The company is ROC-licensed (#186438 CR42) and BBB Accredited with an A+ rating since 2006.
Mesa-headquartered Icon Roofing is a GAF Certified Master Elite roofing contractor, the manufacturer's top residential tier held by a limited number of contractors. It performs roof inspections, repairs and replacements across shingle, tile, flat/foam and metal systems, plus monsoon and storm-damage work. Icon is ROC-licensed (#333889 CR-42) and serves the East Valley of Metro Phoenix from its Mesa base.
Mesa-based Axis Roofing cites over 40 years of combined industry experience and works on asphalt shingle, tile, foam, low-slope and coated roofs. It is an Owens Corning Preferred Contractor and holds Haag Certified Inspector and Tile Roofing Institute credentials, which support storm-damage assessment and insurance-claim work. Axis is ROC-licensed (#333833) and offers 24/7 emergency tarping; per its public BBB profile the business is not BBB accredited.
Stapleton Roofing serves Mesa and the East Valley with tile, shingle, foam, TPO and flat roofing for both homes and businesses, plus roof coatings, waterproofing and maintenance programs. The company is ROC-licensed (#269773) and is BBB Accredited with an A+ rating. It covers a wide East Valley footprint including Gilbert, Chandler, Tempe, Queen Creek and Apache Junction.
Apex AZ Roofing serves Mesa and the surrounding East Valley with a strong focus on storm-damage repair, emergency roofing, flat and foam roofing, single-ply systems, coatings and waterproofing. The company is fully licensed, bonded and insured in Arizona under two ROC licenses (#337049 and #348548) and offers roof inspections and maintenance alongside replacement and installation.
Commercial Roofing in Mesa: Why the Sonoran Desert Demands Specialist Systems and ROC-Licensed Operators
When your commercial roof coating is oxidized, chalky, or showing lap seam separation after years of desert UV exposure
Reflective elastomeric and silicone coatings on Mesa commercial roofs degrade visibly under sustained UV — they chalk, lose reflectivity, and eventually allow moisture infiltration at seams. A commercial roofing assessment can determine whether the base membrane is sound enough to accept a recoat (significantly extending service life without tear-off disruption) or whether a full replacement of the membrane and coatings is the more cost-effective long-term decision for the building owner.
Before the monsoon season, if drainage performance was marginal in prior years
A roof that handled light rain adequately may pond significantly during a monsoon microburst. Internal drains blocked by debris or undersized for the roof area, and scuppers positioned too high above the membrane surface, are common findings on East Valley commercial buildings. Addressing drainage before July eliminates the risk of structural overloading during a storm event — a particular concern on older tilt-wall and light steel commercial construction common in Mesa's industrial corridors.
When budgeting capital expenditure for a commercial property with an aging foam or built-up system
Spray polyurethane foam roofing installed in the 1980s and 1990s on Mesa commercial buildings can still be in serviceable condition if it was re-coated on schedule, but if the coating maintenance lapsed, the foam surface may be weathered beyond effective repair. A licensed commercial roofing contractor with ROC C-42 certification and experience in SPF systems can assess whether a recoat, an overlay, or a full tear-off is appropriate — a distinction that requires hands-on inspection rather than a remote quote.
Frequently Asked Questions
How many commercial roofing contractors are in Mesa?
Our directory lists 9 independently verified commercial roofing contractors serving Mesa, Arizona, ranked by experience, certifications and reputation. Jim Brown and Sons Roofing (JBS Roofing) is ranked #1. There are no paid placements.
How do I choose a commercial roofer in Mesa?
Confirm licensing and insurance for Arizona, ask for commercial project references in Mesa, get multiple written quotes, and check each contractor's BBB standing. Every company listed here has been independently researched.
What ROC license classification should a Mesa commercial roofing contractor hold?
Commercial roofing in Arizona falls under the C-42 (Commercial) classification issued by the Arizona Registrar of Contractors. Some contractors hold a dual KA-42 that covers both residential and commercial work. The license number can be verified free of charge at roc.az.gov before any contract is signed. Any roofing project exceeding the minimum statutory threshold in combined labor and materials legally requires an active ROC license, and unlicensed parties cannot legally pull City of Mesa building permits — the license and the permit are connected.
Are SPF (spray polyurethane foam) roofs a practical choice for Mesa commercial buildings?
SPF is one of the most well-established commercial roofing systems in the Phoenix metro area precisely because of its desert performance characteristics. The foam creates a seamless, self-insulating surface that eliminates most of the flashing and seam vulnerabilities that plague conventional flat roofs, and reflective topcoats cut cooling loads meaningfully on large-footprint buildings. The system does require periodic recoating — typically every several years — and the recoat schedule must be honored for the warranty to remain valid. Contractors with decades of SPF experience are common in Mesa specifically because the system has been proven here.
Does a commercial roof replacement in Mesa require a City of Mesa building permit?
Yes. Reroofs and structural roof work on commercial buildings in Mesa generally require a building permit through the City of Mesa Development Services department. An ROC-licensed commercial roofing contractor pulls the permit in their own name and is responsible for scheduling the required inspections before the roof is covered. Property managers or building owners should confirm the permit has been pulled at project start — the permit number should appear on the contractor's paperwork and can be verified with the city.