Skip to content
Updated June 2026

Best Metal Roofing Contractors in Pune

Compare services, check credentials, and contact a roofing company directly.

How we choose

6 results

Compare contractors (6)

Quick Comparison

Rank Company Specialty Experience Credentials Website
1 Faisal Roofing Solution (I) Pvt Ltd Most established Since 1991 ISO 9001 Certified Visit
2 Disha Industries & Roofing Solutions Pvt. Ltd. Industrial roofing specialist 20+ Years ISO 9001 Certified Visit
3 Maxroof Corporation Private Limited Large-scale manufacturer-installer Since 2007 GST Registered Visit
4 Pushpak Infra Steel Private Limited Turnkey industrial roofing Since 2010 GST Registered Visit
5 Roof Lab Infra Pvt. Ltd. Turnkey roofing and cladding Turnkey provider Manufacturer-Authorized Installer Visit
6 Snepra Buildconn Roofing and industrial contractor Since 2016 Listed Visit

Detailed Reviews

#2

Disha Industries & Roofing Solutions Pvt. Ltd.

Industrial roofing specialist
Experience20+ Years
CredentialsISO 9001 Certified
SpecialtyMetal roofing structures and PEB sheds
Service AreaPune, PCMC and Maharashtra
Services and company details

Disha Industries & Roofing Solutions is an ISO certified manufacturer, supplier and contractor of metal roofing structures, headquartered at Chakan MIDC in Pune's primary industrial belt. The company provides end-to-end services covering design, fabrication, installation, ongoing maintenance and civil construction for industrial roofing, pre-engineered building sheds and large warehouse structures. It supplies colour-coated sheets, structural steel and roofing accessories to factory and logistics clients across Pune, Pimpri-Chinchwad and wider Maharashtra, with contractors active for over two decades.

metal roofing industrial roofing commercial roofing roof restoration roof replacement
#3

Maxroof Corporation Private Limited

Large-scale manufacturer-installer
ExperienceSince 2007 (16+ Years)
CredentialsGST Registered
SpecialtyMetal roofing and pre-engineered buildings
Service AreaPune, Mumbai, Goa and Gujarat
Services and company details

Maxroof Corporation Private Limited, established in Pune in 2007, manufactures and installs trapezoidal and standing-seam metal roofing, structural decking, purlins and related architectural products. The company provides an integrated service spanning project planning, engineering design, in-house manufacturing and on-site installation, handling both roofing and structural work. It is GST registered and reports operational offices in Goa, Mumbai and Gujarat, allowing it to serve large commercial and industrial clients across western and coastal India from its Pune base.

metal roofing commercial roofing industrial roofing roof replacement guttering
#4

Pushpak Infra Steel Private Limited

Turnkey industrial roofing
ExperienceSince 2010 (14+ Years)
CredentialsGST Registered
SpecialtyRoofing sheets, PUF panels and installation
Service AreaPune and across India
Services and company details

Pushpak Infra Steel Private Limited, incorporated in 2010 and based in Pune, manufactures and supplies colour-coated roofing sheets, PUF sandwich panels, polycarbonate sheets and purlins, and provides complete roofing contractor and installation services. The company holds GST registration and an SSI registration, and serves a broad client base that includes railways, infrastructure projects and industrial facilities. Its combined manufacturing and installation capability allows it to take projects from material supply through to finished roofing across Pune and pan-India.

metal roofing industrial roofing commercial roofing roof replacement roof repair
#5

Roof Lab Infra Pvt. Ltd.

Turnkey roofing and cladding
ExperienceEstablished roofing contractor
CredentialsManufacturer-Authorized Installer
SpecialtyRoofing, cladding and facades
Service AreaPune, Mumbai, Nagpur and Kolhapur
Services and company details

Roof Lab Infra Pvt. Ltd. is a Pune-headquartered turnkey provider of roofing, cladding, facade, ceiling and sun-shading systems, with branch offices in Mumbai, Nagpur and Kolhapur. It offers roof installation, re-roofing, single- and double-skin roofing, guttering and RCC building renovation, and is an accredited installer for a color-coated metal roofing sheet manufacturer. It states it has completed more than 1,500 projects.

metal roofing commercial roofing industrial roofing residential roofing roof restoration guttering
#6

Snepra Buildconn

Roofing and industrial contractor
ExperienceSince 2016 (8+ Years)
CredentialsListed
SpecialtyMetal roofing and industrial civil works
Service AreaPimpri-Chinchwad and Pune
Services and company details

Snepra Buildconn, established in 2016 and operating from Pimpri-Chinchwad MIDC, manufactures and installs MS structural sections and colour-coated metal roofing, and takes on turnkey work including PEB sheds, prefabricated structures, industrial flooring and waterproofing. The firm reports a production capacity of 1,000 square metres per run and serves factory, warehouse and civil-works clients across Pune and Maharashtra. Its location within PCMC's industrial corridor gives it ready access to the manufacturing clients concentrated in and around Pimpri-Chinchwad.

metal roofing industrial roofing commercial roofing waterproofing roof repair

When to Choose Metal Roofing in Pune

For a new factory or warehouse shed in a Pune MIDC estate

Industrial sheds in Chakan, Ranjangaon and Talegaon are almost universally metal-roofed, using pre-engineered buildings or trussless Galvalume systems that span large areas without internal columns. A metal roofing specialist who manufactures and installs these systems locally understands the purlin spacing, ridge-ventilator sizing and monsoon-drainage details that distinguish a durable Pune MIDC shed from a low-cost installation that fails after a few monsoons.

When replacing an ageing GI sheet roof on an older Pune industrial building

Older corrugated GI roofs on factory buildings in Hadapsar, Bhosari and Mundhwa degrade through fastener corrosion, sheet buckling and failed ridge flashings over years of monsoon exposure. Metal roofing contractors in Pune can assess whether the existing purlin structure can support a new Galvalume or colour-coated sheet overlay or whether full structural replacement is required, avoiding the premature failure of an over-overlay on compromised purlins.

For residential or commercial metal canopies under PMC jurisdiction

Residential extensions, car porches and commercial forecourts across Pune's residential zones often use profiled metal or polycarbonate sheets on a light steel frame. Pune Municipal Corporation's Development Control and Promotion Regulations (under Maharashtra's UDCPR 2020) govern what counts as a permitted structure versus a structure requiring approval. A metal roofing contractor familiar with PMC norms can confirm compliance requirements before fabrication and installation.

Frequently Asked Questions

How many metal roofing contractors are in Pune?

Our directory lists 6 independently verified metal roofing contractors serving Pune, Maharashtra, ranked by experience, certifications and reputation. Faisal Roofing Solution (I) Pvt Ltd is ranked #1.

How do I choose a metal roofing roofer in Pune?

Confirm licensing and insurance for Maharashtra, ask for metal roofing project references in Pune, get multiple written quotes, and check each contractor's BBB standing. Every company listed here has been independently researched.

What metal roofing materials are most suitable for Pune's monsoon and summer climate?

Galvalume (aluminium-zinc coated) and PPGL (pre-painted Galvalume) sheets outperform plain GI in Pune's climate because the aluminium component improves corrosion resistance under monsoon moisture and the Deccan sun's UV load. For industrial sheds where internal temperatures matter, PUF-insulated sandwich panels reduce heat gain substantially. Ridge ventilators and eave-level ventilation improve airflow in large sheds and are standard on well-specified industrial roofing in the MIDC zones.

How should a Pune factory owner evaluate the remaining life of a metal shed roof?

A qualified metal roofing assessor will check the base-metal coating thickness at several points, inspect fastener heads for corrosion and pull-through, measure gutter depth and outlet sizing against the site's drainage requirement, and look for sheet deformation or joint gaps at ridge and hip lines. In Pune, where monsoon loads are concentrated and prolonged, degraded fasteners and blocked gutters are the most common failure modes on older sheds.

Do metal roofing installations in Pune require GST invoicing?

Yes. Metal roofing installation is a works contract covered under SAC 9954 in India's GST regime. Buyers should confirm that quotes are GST-inclusive and request a tax invoice specifying the applicable rate. For purchases of roofing sheets and accessories without installation, GST applies under the relevant goods schedule. Commercial and industrial property owners can generally claim input tax credit on roofing works where the property is used for a taxable business purpose.