Best Metal Roofing Contractors in Reno

Metal roofing — standing seam and metal shingles — is valued in Reno for its longevity, wind resistance, and ability to shed snow and rain. The 6 contractors below were selected from our full Reno top 10 as the strongest for metal roofing work, ranked by experience, manufacturer certifications, BBB standing, and verified reputation.

Reno's position at the eastern base of the Sierra Nevada gives it a climate that challenges most conventional roof materials in both directions simultaneously. Winters produce significant snowfall events, particularly in elevated areas of the Truckee Meadows, combined with sharp temperature swings that drive freeze-thaw cycling at the eave. Summers are dry, intensely sunny, and subject to high UV intensity at 4,500 feet elevation. Metal roofing handles both extremes well: standing-seam panels shed snow cleanly without the ice-dam vulnerabilities that plague eave-area asphalt, and the same systems resist UV degradation for decades with factory-applied PVDF or Kynar finishes.

The sheet metal fabrication tradition among Reno's established commercial roofers reflects how deeply embedded metal systems are in the local market — not just for residential standing-seam, but for the custom flashings, copings, and R-panel commercial applications on the warehouses, casinos, and government buildings that define the metro's commercial landscape. Contractors with in-house sheet metal capability can produce custom components for complex rooflines without relying on off-the-shelf fabrication, which matters on the hillside residential custom homes throughout the Caughlin Ranch, Somersett, and southwest Reno corridors.

How many metal roofing contractors are in Reno?

Our directory lists 6 independently verified metal roofing contractors serving Reno, Nevada, ranked by experience, certifications and reputation. D & D Roofing and Sheet Metal, Inc. is ranked #1. There are no paid placements.

How do I choose a metal roofing roofer in Reno?

Confirm licensing and insurance for Nevada, ask for metal roofing project references in Reno, get multiple written quotes, and check each contractor's BBB standing. Every company listed here has been independently researched.

Do I need a permit for a metal roof installation in Reno?

Yes. Re-roofing projects in the City of Reno generally require a building permit and inspections through the city's building department, and contractors must hold a current Nevada State Contractors Board license in classification C-15 or C-15a. Homeowners can verify any contractor's license status and monetary limit at the NSCB website. A licensed Reno metal roofing contractor will pull the permit under their own credentials and coordinate the required inspection.

How does standing-seam metal handle Reno's snow compared with asphalt?

Standing-seam metal's smooth, low-friction surface allows snow to slide off once it begins to move, rather than accumulating and refreezing as ice dams at the eave — a common and damaging failure mode on asphalt roofs in Reno's snow-exposure areas. The tradeoff is that controlled snow retention may be needed on homes where abrupt snow release onto walkways, decks, or landscaping below could cause harm. Experienced Reno roofers can advise on snow guard placement specific to your site.

Which metal roofing finish holds up best to Reno's UV exposure?

PVDF or Kynar-based factory paint systems are the industry standard for UV resistance in high-elevation, high-UV markets like Reno. These coatings maintain color and chalk resistance far longer than standard polyester paint systems, which begin to fade and chalk noticeably under the high-altitude solar intensity of the Truckee Meadows. Galvalume substrate under a PVDF finish is the combination most often specified by experienced Reno metal roofers for long-term residential and commercial applications.