Roof Inspection Checklist

From Roofs Wiki

Need a roofer? Compare top-rated local roofing contractors in your city.

Find a Local Roofer →

Roof Inspection Checklist

A roof inspection checklist is a systematic list of the roof, attic, and drainage points a homeowner should examine twice a year — and after every major storm — to catch problems while they still cost $150–$750 to repair instead of $5,000–$15,000 to re-roof. A complete DIY inspection takes 45–90 minutes, requires only binoculars and a flashlight, and can be done almost entirely from the ground and the attic. The checklist below works in any season; for season-specific tasks, pair it with the Spring Roof Inspection Checklist and the Fall Roof Winterization Guide.

How Often Should You Use This Roof Inspection Checklist?

  • Twice a year: once in spring (to find winter freeze-thaw and ice-dam damage) and once in fall (to prepare for winter). This matches the guidance in How Often Should I Have My Roof Inspected.
  • After every major storm: high winds, hail, or heavy snow load each warrant a walk-around the same week — see Signs of Roof Damage After a Storm.
  • Professionally every 2–3 years, or annually once the roof passes 15 years of age. A professional inspection costs roughly $120–$400 and catches what binoculars cannot.

Most of this checklist is performed safely from the ground or inside the attic. If you do climb, read the Roof Safety Guide for Homeowners first, never walk a wet or icy roof, and skip roof walking entirely on tile, slate, or steep pitches.

Exterior Ground-Level Checklist

Walk the full perimeter of the house with binoculars on a dry, bright day. Check off each item:

Check What to Look For Action if Found
Shingle condition Missing, cracked, curling, or buckled shingles; gaps in the pattern Repair promptly — see How to Replace Damaged Shingles
Granule loss Bald or shiny patches; granules at downspout outlets Monitor; widespread loss suggests aging — see Signs You Need a New Roof
Roofline shape Sagging ridge or roof planes; visible dips Professional structural evaluation, promptly
Flashing (visible) Rust, lifted edges, gaps at chimney, walls, and valleys Reseal or repair — see How to Repair Roof Flashing
Chimney Cracked mortar, leaning stack, gaps at flashing, damaged cap Mason or roofer depending on failure — see Chimney Flashing Repair
Fascia and soffits Peeling paint, rot, water stains, pest holes, blocked vents Repair and clear vents
Moss, algae, lichen Dark streaks or green growth, especially shaded north slopes Treat — see How to Remove Moss and Algae from Your Roof
Overhanging trees Branches within 6 feet of the roof surface Trim back
Ground debris Shingle pieces, granule piles, flashing fragments, nails Investigate where they came from

Roof-Surface Checklist

Perform from a ladder at the eaves or, where safe, on the roof. Many items can also be checked with binoculars or a zoom camera.

Check What to Look For Action if Found
Penetration flashing Cracked vent pipe boots, loose exhaust hoods, gaps at mounts Replace boots — see How to Replace Vent Pipe Flashing and How to Seal Roof Penetrations
Sealant condition Dried, cracked, or peeling sealant at flashing edges and nail heads Re-caulk with proper products — see Roofing Sealants and Adhesives Guide
Valleys Debris accumulation, displaced valley metal, shingle erosion Clear and repair
Ridge line Damaged or missing ridge cap shingles, lifted ridge vent Re-fasten or replace
Skylights Cracked glazing, failed sealant, debris dammed on the uphill side Address early — see Skylight Leak Repair
Nail pops Raised shingle tabs over backed-out nails Re-fasten and seal
Drip edge Bent, loose, or missing sections along eaves and rakes Repair — see How to Install a Drip Edge
Soft spots Spongy feel underfoot (deck rot) Stop walking; professional assessment

Attic and Interior Checklist

The attic reveals problems weeks or months before they show on a ceiling. Bring a strong flashlight and inspect on a dry day, then again during steady rain if you suspect a leak.

Check What to Look For Action if Found
Daylight through the deck Pinholes or gaps visible in the sheathing Mark and seal from the roof side
Water stains Dark trails on rafters and sheathing; new stains vs old dry ones Trace uphill to entry point — see How to Find and Fix Roof Leaks
Insulation Wet, compressed, or moldy patches; insulation blocking soffit bays Dry/replace; install baffles — see Attic Ventilation and Insulation Guide
Mold and odor Black/green patches on wood, musty smell Fix moisture source; remediate
Ventilation performance Attic much hotter than outdoors; condensation on nails or sheathing Improve airflow — see Roof Ventilation
Structure Sagging, cracked, or split rafters and trusses Structural professional, promptly
Penetration backsides Staining around chimney, vents, and skylight shafts Matches an exterior flashing item above
Interior ceilings Stains, bubbling paint, hairline cracks at ceiling corners Find and fix the leak before repainting

Gutter and Drainage Checklist

Roof drainage failures damage fascia, foundations, and basements long before the roof itself leaks.

Check What to Look For Action if Found
Gutter debris Leaves, needles, shingle granules filling the trough Clean — see How to Clean Gutters Safely
Gutter slope and mounting Sagging sections, separated hangers, standing water after rain Re-pitch and re-fasten
Seams and corners Drips or rust streaks at joints and end caps Reseal
Downspouts Clogs (test with a hose), crushed sections, disconnected joints Clear and reconnect
Discharge Water exiting at least 4–6 feet from the foundation Add extensions or splash blocks
Fascia behind gutters Rot or staining where gutters mount Repair and check drip edge
Ice dam evidence (cold climates) Bent gutters, ice ridges at eaves in winter Improve ventilation/insulation — see How to Prevent and Remove Ice Dams

What Are the Limits of a DIY Roof Inspection Checklist?

A homeowner checklist catches the majority of developing problems, but be honest about its boundaries:

  • Don't walk what you can't walk. Steep pitches, wet or icy surfaces, tile, slate, and brittle old shingles are off-limits — binoculars, a zoom lens, or a drone cover most of it. How to Inspect Your Roof details ground-based technique, and When to DIY vs When to Call a Roofer is the honest decision guide.
  • Hidden layers stay hidden. Underlayment condition, deck rot under intact shingles, and fastener corrosion can't be seen without lifting material. This is what professional inspections and moisture meters are for.
  • Hire a professional when the roof is 15+ years old, after significant hail, before buying or selling a home, or whenever your checklist turns up structural sag, widespread granule loss, or recurring leaks. An inspection report also creates a paper trail that supports warranty and insurance claims — see Roofing Insurance Claims and Warranties.
  • Act on findings by priority. Active leaks, exposed underlayment, and structural issues within days; failed sealant and minor flashing within weeks; cosmetic and preventive items seasonally. Typical pricing for what you find is laid out in Roof Repair Costs.

Quick Facts

Metric Value
Inspection frequency 2× per year (spring and fall) + after major storms
DIY inspection time 45–90 minutes
Tools needed Binoculars, flashlight, ladder, camera
Professional inspection cost $120–$400
Professional frequency Every 2–3 years; annually after roof age 15
Typical small repair if caught early $150–$750
Typical cost if neglected $5,000–$15,000+ (premature replacement)
Safest method Ground + binoculars + attic; minimal roof walking

Frequently Asked Questions

How often should a roof be inspected?

Inspect twice a year — spring and fall — plus after any major wind, hail, or heavy-snow event. Add a professional inspection every two to three years, moving to annually once the roof passes 15 years old. Twice-yearly checks catch most problems while repairs still cost a few hundred dollars.

What should a roof inspection checklist include?

Four zones: exterior ground-level checks (shingles, flashing, fascia, roofline shape), roof-surface checks (penetrations, sealant, valleys, ridge, skylights), attic and interior checks (stains, daylight, insulation, ventilation, structure), and gutter and drainage checks (clogs, slope, downspout discharge). Work zone by zone and record findings with photos for year-over-year comparison.

Can I inspect my roof without climbing on it?

Yes — most of a thorough inspection happens from the ground with binoculars, from a ladder at the eaves, and inside the attic with a flashlight. Roof walking adds little for most homeowners and carries real fall risk, especially on steep, wet, or aging roofs. Leave on-roof work to professionals.

When should I call a professional instead of inspecting myself?

Call a professional when the roof is over 15 years old, after significant hail, before a real-estate transaction, or when your own checklist reveals sagging, widespread granule loss, soft decking, or leaks you cannot trace. Professional inspections cost $120–$400 and document conditions for insurance and warranty purposes.

Find a Roofing Contractor

Ready to hire a professional? Browse the roofs.wiki roofing contractor directory — an independently researched, BBB-verified ranking of the top roofing companies across the US and Canada, including Calgary, Toronto, Vancouver, and many more cities.

Related Resources